|
|
BLAM AR15 M16 Bayonet Lug Accessory Mount
General Info
*NOT FOR SALE OUTSIDE THE USA*
BEWARE OF CHEAP-JUNK, FOREIGN MADE AIRSOFT GRADE KNOCK-OFFS BEING SOLD FOR LESS.
THE CDP BLAM IS THE ONE AND ONLY ORIGINAL TESTED AND PROVEN DESIGN.
IT IS THE ONLY MOUNT OF ITS KIND, TRUSTED AND IN USE BY U.S. MILITARY AND LAW ENFORCEMENT AGENCIES.
MADE RIGHT HERE IN THE USA.The BLAM now accepts QD Push-button Sling Swivels.
This is the ORIGINAL BLAM - AR15 BAYONET LUG ACCESSORY MOUNT, Bayonet Lug Flashlight Mount, Bayonet Lug BiPod Mount for Colt Style front sight bases and bayonet lugs.
Our Bayonet Lug Accessory Rail was designed for, and in cooperation with Law Enforcement officers.
It is currently in use by numerous Federal, State and local Law Enforcement Agencies on Patrol and Special Team Rifles.
Specifically designed to accept compact pistol or sidearm lights,
Bi-Pods and other accessories available for the AR15 & M16 Series rifles. It is a specially designed bayonet lug adapter for the secure fitting of light & laser equipment, bipods & any Picatinny/Weaver Rail mounted device.
Installation is easy: Simply punch out the forward sling swivel rivet, slide the BLAM over the bayonet lug, and secure the mount with the provided screws.
The BLAM Bayonet Lug Mount provides a secure, movement free and easily accessible mount forward of the handguard
for a quick and easy transition of a weapon light from a pistol to a rifle.
- FEATURES:
- 2.25" Long with 5 index positions.
- Weighs only 1.6 Ounces or 45 Grams
- Precision CNC Machined from T6061 Aluminum Billet
- Hard Anodized [MIL-A-8625F] Black, Type III
- Dual Quick Detach Sling Mounting rings are incorporated into the body to provide a sturdy mount for a sling
- The BLAM accepts and works best with USA Made QD Push-button Sling Swivels like the MagPul MAG540 and GrovTec GTSW's. IMPORTED and lesser Quality QD Swivels may be a loose fit and not work well.
- Easy to fit using a 3/32" drive pin punch for the removal of the forward sling swivel rivet.
- Secure, no movement, rock solid mounting using two machine screws and and hex key, provided
- Picatinny rail spacing & dimensions to accept any rail mounted accessory.
- Mount on ANY Sporter or Colt AR15/M16 variant with a Bayonet Lug on the front sight base.
- Manufactured in the USA by Custom Defensive Products.
- 100% Satisfaction Guarantee to the original purchaser.
REGARDING THE UPWARD ANGLE OF THE MOUNT:
Being designed primarily for Close Quarter Battle situations, all of our mounts are specifically designed and intended to have a slightly upward angle variation of about 8 to 10 degrees when correctly installed. This angle is a functional necessity of the design to allow for the correct alignment of the sights to be nearest the center of the light beam at 15 to 20 yards.
BLAM BAYONET LUG ACCESSORY MOUNT
|
SUREFIRE X200A
|
SUREFIRE 951P
|
INSIGHT M6 TACTICAL LASER ILLUMINATOR
|
INSIGHT M3 TACTICAL ILLUMINATOR
|
STREAMLIGHT TLR-2 with LASER SIGHT
|
ALL Photographs are the property of Custom Defensive Products, Copyright 2005 - 2022.
SureFire, X200A and any SureFire associated model numbers are the Trademarks of SureFire, LLC.
Insight Technology, Insight Tech-Gear, M3, M6 and any Insight associated model numbers are the Trademarks of Insight Technology, Inc.
Streamlight, TLR-2 and any Streamlight associated model numbers are the Trademarks of Streamlight Inc. MAGPUL and any MAGPUL associated model numbers are the Trademarks of Magpul Industries Corp.
GrovTec and any GrovTec associated model numbers are the Trademarks of GrovTec US, Inc.
Bayonet Lug Rail, Bayonet Lug Mount, Bayonet Lug Accessory Rail, Tactical Light Rail, AR15 rail, Tactical Light and Accessory Rail, Tactical Light and Accessory Mount, Light Mount, AR15 LIGHT MOUNT, AR15 LIGHT RAIL, M16 LIGHT MOUNT, M16 LIGHT RAIL, Tactical Light Mount, Tactical Rifle Light Mount,
AR-15/M16 Mounts, Flashlight Mount, Tactical Flashlight Mount AR15, Bayonet Lug Flashlight Mount, M16, AR-15/M-16 Bayonet Lug Picatinny Rail Mount, BiPod Mmount
Product Reviews
Average Customer Review:  7 Reviews
Write an online review and share your thoughts with others.
|
|
The Perfect Mount For Bipod., 8.19.2021
|
|
Reviewer: Thomas C. (, Michigan)
|
I was looking for a bayonet adaptor to mount my Bipod on my Colt AR15. I did not want to end up mounting it on the front part of the fore stock.
I finally found the perfect adaptor produced by Custom Defensive Products.
I wanted to make sure that it would fit my firearm so I called and talked with Dan. He was great. Very polite and he answered all of my questions. I ordered the mount with the two QD holes over the phone right there. It arrived two days later. Super fast delivery.
Upon opening up the package I was very happy to see the excellent quality of the mount. Complete with mounting instructions. I had it installed in no time and it fits my firearm perfectly. A very solid, very well made mount. The plating is flawless. Very sturdy with the two mounting positions. This mount is GREAT.
I ended up ordering a second mount for my other carbine. Same super fast delivery of a very well Made In USA product. I am one very happy camper.
Thank you Dan and Custom Defensive Products for taking care of my bipod mount situation.
|
|
|
CDP BLAM, Finally got it - Worth the Wait, 8.12.2021
|
|
Reviewer: J.R. Martin (, TX)
|
CDP was out of the BLAM for almost 8 months because of the PLANNED-DEMIC.
I was on the wait list 6 months but they finally got them made.
It was definitely worth the wait. The fit and finish is outstanding and it is easy to see they are making a quality part.
It' is a few dollars more than I wanted to spend but the BLAM is exactly what I need for my bipod and Streamlight TLR-1.
I have bought 2 of these now and it looks like it is a factory made part on my Colt rifles.
Fair shipping on the same day I paid for it and had it 3 days later. A great product!
|
|
|
OK, I'm sold on it., 3.19.2018
|
|
Reviewer: Stephen Fornelius (Oro Valley, AZ)
|
I bought the product because my Ruger AR 556 didn't have any good way of mounting a bipod.
With my old eyes I need things as steady as possible.
It arrived in the mail and I was immediately impressed at the quality and the work that went into making it. Like it says in the instructions, you might have to tap it with a wooden or plastic hammer, but that just means it fits tight with no rattle. The screw that locks it into the QD hole was a perfect fit.
All in all, very happy I made the decision to buy it and I like the quality and how it looks mounted.
|
|
|
Product is perfect for an AR light mount, 12.29.2015
|
|
Reviewer: BL Grady (, KY)
|
I purchased two of these mounts, one of the BLAM with rings and one of the BLAM2, without the rings. Both fit perfectly on my rifles and accept a vertical foregrip, several types of lights and a Harris bipod. Flawless, easy installation and very steady, no movement or rattle. The quality is clearly evident when you handle them and also in use on the rifles. I cannot say anything negative about either mount. First class product and 5 stars all the way.
|
|
|
GREAT MOUNT!, 9.17.2012
|
|
Reviewer: D. McCool (Edinboro, PA)
|
CRAFTMANSHIP IS AS NICE AS IT GETS! FINISH IS THAT PERFECT MILITARY MATCH AND IT INSTALLS IN MINUTES!
TAKE IT OFF AND YOUR YOUR BAYONET LUG IS READY TO PUT YOUR BAYONET BACK ON!
IT DON'T GET ANY BETTER THAN THAT, AND MADE IN USA!
|
|
View all 7 reviews
|
FAQs
Q: When I mounted the BLAM on my rifle, it is not parallel with the barrel.
It seems to be tilted upward toward the muzzle.
Can I get one that is aligned evenly with the barrel?
A: Being designed primarily for Close Quarter Battle situations, all of our mounts were specifically designed and intended to have a slightly upward angle variation of about 8 to 10 degrees when mounted.
It is a functional necessity of the design to allow for the correct alignment of the sights to be nearest the center of the light beam at 15 to 20 yards.
The angle may vary slightly, depending on the manufacturer of the front sight base casting.
This alignment was tested using the SureFire X200A the X300, Streamlight TLR-1 and TLR-2, and the Insight M3 and M6 Tactical Illuminators.
This incorporated angle also allows for correct centering and zeroing of a laser such as on the Streamlight TLR2 or Insight M6.
If the mount remains parallel with the barrel, ANY laser mounted on the BLAM will not have enough vertical adjustment to easily bring the dot into alignment with the sights.
If it is mounted parallel with the barrel, the light will be too low on the target, below center of mass.
If you insist on having the mount parallel with the barrel, you would need to elongate the holes in the sight base clevis UPWARD, where the rear screw replaces the sling loop.
You might also have to remove material from the base of the sight tower on either side of the clevis, where the mount would contact the base, depending on the manufacturer of the sight tower itself.
When the mounts are attached to the rifle correctly and a light is attached to the mount, one does not typically notice any difference in the alignment.
If you are more concerned about how the mount "LOOKS" on your rifle than the practical functionality of the well planned, affordable design, perhaps the BLAM or BLAM2 is not for you.
Q: I have read on several forums that mounting a light at the 6:00 o'clock position on my AR will cause the light to cast a shadow on the target.
How do you address this concern?
A: Thousands of Law Enforcement Officers and operators who use these, and other mounts at the 6:00 position, will disagree with that statement.
Mounting a weapon light on your AR at the 6:00 o'clock position on the Bayonet Lug is IDEAL for close quarter engagements out to 25 yards.
First, access to the light switch is immediate and right at the position of your support hand on the forearm of the rifle.
Second, the truth is, any shadow cast by a light mounted on a BLAM or BLAM2 will be well above the target and out of your line of vision.
Your ability to FOCUS on the front sight and the target should be developed with proper training and practice.
When you do, you won't see anything but the target.
Third, mounting lights or other items on either side of the sight tower only further obstructs the line of vision covering the target. That is more of a distraction than any shadow.
Also, the size of any shadow depends on the diameter of the beam being cast by the light.
Ideally, you want a powerful, narrow beam with a bright center to illuminate the target.
The wider the beam, the more shadow will be cast.
Learn by YOUR OWN experience, rather than trusting uninformed opinions posted by someone who has no experience with our products.
Your satisfaction is unconditionally guaranteed.
Q: Are the holes in the BLAM designed for the QDS on the Magpul MS4 sling?
A: YES! We actually designed the QD loops on the BLAM and BLAM-R using the specifications of the MAGPUL patented design for the QD Swivel.
We also use MAGPUL QD sling swivels to test the final fit prior to bead blasting and hard anodizing the parts.
Other Products This Category
|
|
